Qingshuang Stirling Engine Generator for Small Engines

1. First and foremost, pull the flywheel by hand to assess its smoothness. If it is not smooth, adjust the relevant screw (this should have been done before the sale).

2. Next, check the sliding parts to ensure they are clean.

3. Thirdly, fill the alcohol lamp up to two-thirds; alcohol above 95 degrees is the best choice.

4. Proceed to light the alcohol lamp at the front of the test tube. Approximately 1 minute later, pull the flywheel and the engine should start rotating. Preheating time with the generator may take slightly longer.

5. Important notes:

6. Do not touch the heated test tube to avoid scalding.
7. When lighting the alcohol lamp for an extended period, be cautious as the lamp can become too hot to touch, to prevent burns.
8. Refrain from handling the test tube while heating the cotton thread of the alcohol lamp.

The key steps can be summarized as follows:

1. Check the flywheel's smoothness and adjust the screw if necessary.
2. Inspect the cleanliness of the sliding parts.
3. Fill the alcohol lamp with high-quality alcohol (95 degrees or above).
4. Light the alcohol lamp, wait for about a minute, then pull the flywheel to start the engine.
5. Exercise caution when handling the heated components to avoid injury.

By restructuring the content and providing clear, step-by-step instructions, the revised version aims to enhance the overall reading experience and ease of understanding for the user.

product information: